Ultrasonic Thickness Gauge

• High Accuracy and Precision

UT possesses unique characteristics that make it provide with ultra high accuracy in various material thickness measurement, and locating internal flaws in thick or complex-construction materials.

• High Reliability For Diverse Applications

Ultrasonic examniations can be used on metals, non metals like plastic,composites, rubbers and more. It has very wide applications, such as pressure vessel and pipe inspection,aerospace parts and automobile stamping parts inspection, etc.

• Safety & Non-Hazardous Operation

Ultrasonic testing measures the thickness or inspects the detection by launching the harmless high-frequency sound waves, eliminating radiation riskes. That means ultrasonic inspection is more safe for operators and tested workpieces.

• Real-time Measurement and Display

Delivers thickness measurement immediately. Portable ultrasonic thickness gauge can display the accurate, real-time thickness measurement.

1.Pipeline and Pressure Vessels Inspection:YUSHI ultrasonic thickness meters measure wall thickness of pipelines, tanks and other pressure vessels to inspect the corrosion degrees of internal construction.The innovative Thru-coating Technology supports measurements of substrate metal thickness without removing the coating or painting,(Up to 20mm thick coatings)

2.Boiler and Heat Exchanger Inspection: YUSHI PM5 GEN2 and PM5 GEN3 ultrasonic thickness gauges can be equipped with Oxide Layer Measurement Mode, which can accurately measure the thickness of oxide layers on the inner tube wall. This powerful option can not only measure the thickness of oxide layers, but also can display the thickness of the tube. 

1.Fuel Power Plant Pipeline Inspection: The boilers and pressure vessels need more precise thickness measurement by the high-precision ultrasonic thickenss gauges. YUSHI PM5 GEN2 and PM5 GEN3 support efffective and high-accuracy boiler tube inspection(as above).

2.Wind Energy Devices and Thick Sections Inspection: YUSHI ultrasonic thickness testers can measure the thickness of blade laminate and structural components,such as glass fiber, composited materials, steel towers,etc. A special option-Large Range Measurement Mode  can measure the thick sections even up to 38m.

 

1.General Quality Control: Verify thickness of raw materials (sheet metal, sheet metal, bar stock), machined parts, castings, and forgings per specification. The high resolution option (0.0001mm) ensures the accuracy of critical components.

2.Coating/plating Thickness Inspection: YUSHI Ultrasonic Thickness Gauges withA/B scan functions can measure the thickness of paint, anodized, galvanized, or other coatings on a metal substrate (double measurement, coating pattern). This applies to automotive parts, electrical appliances and prefabricated structures.

3.Dual-metal Composites Inspection: Use the double or multiple measurement options to accurately measure the thickness of a single layer in a cladding material (e.g., stainless steel on carbon steel).

4.Aerospace and Automotive Parts Inspection: PM5 GEN2 has great capability for measuring thin plates, complex geometries (e.g., turbine blades with pen probes, automotive stamped R angles), engine components, and special coatings.

 

 

1.Multilayer Composite Inspection: Use the MULTIPLE LAYER MEASUREMENT option to accurately measure individual layers in multiple layers of aircraft transparencies (windshields).

2.Composite Structures: Measure the thickness of fiberglass, carbon fiber composite, and other composite materials used in airframe and components. Low frequency probes and wide range options are beneficial.

3.Inspection of engine components: YUSHI provides UM-5 Dual-element ultrasoni thickness gauges and PM5 Series to help users solve the problems in high temperature measurement of turbine blades and casings.

 

 

1.Plastics and Composites Inspection: measure the thickness of vessels, pipes, tanks and molded parts (e.g. fuel tanks, consumer goods). High resolution and wide range options for a variety of requirements.

2.Rubber and High-attenuation Materials Inspection: Measure thick rubber linings, tires, and seals using low-frequency probes designed for highly attenuating materials.

3.Absorbing Materials: Measure coatings designed for electromagnetic wave absorption (as highlighted in the document).

4.Cast Iron Analysis: Indirect assessment of Nodularity/Nodularity by sonic velocity relationship (specific calibration/reference required).UM-5 Series and PM5 Series ultrasonic thickness meters can transmitt the ultrasonic wave to the bottom of the workpieces despite of the coarse grain.

UM-1

UM-2

UM-4 Series

UM-5 Series

PM5 GEN2

 

 

 

 

 

 

Before the products leave the factory, the factory inspects the products strictly according to the standard, and the products can be shipped only after passing the inspection. All YUSHI products are of high quality in accordance with national and world standards.

Once the products are shipped out, if it is clear that it belongs to the quality problem of factory design and manufacture. YUSHI will provide repair and parts replacement service free of charge during the 12-month free warranty period.

 

We're well-known as one of the leading ultrasonic thickness gauge manufacturers and suppliers in China. Please feel free to buy high quality ultrasonic thickness gauge for sale here from our factory. Contact us for more details.

ultrasonic wall thickness probe, ultrasonic thickness gauge, PT 04 Ultrasonic Thickness Gauge Fingertip probe