PR20 Ultrasonic Pulse Generator and Receiver:Precision Detection & Intelligent Control

Core Advantages
Precise positioning, efficient detection, comprehensive functions
Maximum Bandwidth:20Mhz
Internal Trigger Repeptition Rate: 8 Adjustable Levels
Pulse Width:1~40 Adjustable(about 28ns at one time)
Transmit Voltage:8 Selectbale settings up to 400V
Damping Control: Various Adjustable Settings
Supports Transmit-Receive(TR)mode and Pulse-Echo Mode
Receive Gain Range:60dB maximum
Products Generalization
The PR20 Ultrasonic Pulse Generator and Receiver is designed for industrial non-destructive testing, probe frequency inspection, material analysis and experiments. As a computer-controlled intelligent inspection equipment, PR20 integrates high-voltage pulse transmission, high-sensitivity signal reception and intelligent analysis, supporting complex scenarios such as ultrasonic flaw detection, thickness measurement and transducer performance testing. Users can flexibly adjust the parameters via the Windows-based Control Software and switch single/double crystal modes with a single click to meet the various needs for inspection.
The Industry Pain Points That PR20 Can Solve
1. Superb Performance, Capture Every Detail
Bandwidth 0.5-20MHz:Achieving low-frequency penetration and high-frequency resolution requirements,easily detecting micrometer detects;
Transmit Voltage 60-400V, 8 adjustable levels: Providing different output voltage for different materials
Pulse Width 1-40 times adjustable(from 28ns): Improve signal duration
2. Intelligent software control, Easy and efficient operation
No installation for any control software platform: Without any complex configuration,users just connect the pulse generator module with oscilloscope and computer.
One key to save parameters: PR20 supports custom configuration files, which can greatly increase the efficiency for inspection and analysis.
3.Flexible switching of two Excitation modes
Pulse-Echo(P-E) Mode & Penetration(T-T) Mode
Key Features of PR20
I.Excellent Performance For Pulse Generation And Reception
The PR20 is driven by Windows control software. This device simplifies complex parameter adjustments. The interface is divided into trasmitting area and receiving area. The users are allowed to:
- Select the internal trigger or external trigger.
- Adjust pulse voltage, pulse width and repetition rate.
- Switch between single/double element(s) modes.
- Choose damping and gain settings.
The software also supports parameter presets, allowing users to save and reload configurations for repeatable test workflows. In addition, YUSHI INSTRUMENTS offers an open SDK (Software Development Kit) that enables developers to create customized applications based on specific operational requirements.

This Powerful Pulser Receiver can generate high-quality ultrasonic pulses while offering precise control over signal reception. PR20 supports users to adjust emission parameters such as voltage (60V to 400V), pulse width (adjustable from 1 to 40, approximately 28ns per unit), and repetition frequency (4Hz to 2kHz). The device supports both internal and external triggering.
For the reception, the PR20 has 4 dampings(34Ω, 50Ω, 90Ω, 510Ω)and wide gain range (0dB to 60dB). It has two operation modes-supporting single-element (pulse-echo) and dual-elements measurement mode. That means the ultrasonic pulser receiver allows various inspection requirements.

II. Can Be Connected With Other Equipment
The product includes the instrument itself and the corresponding control software. The ultrasonic pulse generator and receiver is an independent instrument with dimensions of 184 mm in length, 126 mm in width and 50 mm in height.

In addition to the round power switch button, the instrument body has 5 interfaces:
2 BNC connectors (Q9 interfaces): The outermost port is the signal output interface for connecting to an oscilloscope to display the received waveform; the other is the input end for external triggering.
2 C5 interfaces: Used to connect an ultrasonic transducer, single crystal probe connection interface (T/R), dual crystal probe requires two interfaces (T/R and R);
1 Type-C communication interface: Connects to a computer via a USB Type-C cable for communication and power supply.


What Are The Core Applications of PR20?

Probe Performance Detection and Analysis
With PR20, users can inspect the probes' performance through simple operation.
By connecting with oscilloscope which has TFT function, the inspectors can:
Capture and identify the bottom signals from calibration block;
Analysis the frequency spectrum to verify the actual probe frequency;
Make comparision between the measured value and nominal frequency.
High-precision thickness measurement
Adapting the ultrasonic pulse-echo principle,PR20 ultrasonic pulser can easily achieve high-accuracy thickness measurement. This device can:
Display the time interval between the successive bottom echoes;
Be suitable for various of material that has different sound velocities.


Precise Ultrasonic Flaw Detection
YUSHI PR20 has strong ability to transmit high-voltage pulses and support to adjust the parameters for the detection waveform. This outstanding features let it become an effecitive instrument module to inspect the cracks, pits or other kinds of detection in the forgings, welding plates or other workpieces.
Why Choose PR20?
Intelligent: Adapts to a variety of test targets and probe types.
Accurate: Provides accurate and stable results for critical inspection or measurements.
Developable: Can be connected with other instruments or be customizable for special use.
Portable: Compact and lightweight (542 g) for wide usage scenarios.
Maintenance And Repair
1.Strict collision avoidance, during the use and storage of the instrument, pay attention to dust, moisture, and acid and alkali substances.The instrument should be kept away from strong electromagnetic fields.
The surface coating of the instrument end cover will cause a chemical reaction with high-concentration alcohol. Keep it away from alcohol products with a concentration above 75%.
2.If there is any quality problem, please contact the manufacturer.
Since the devices are high-tech products, the maintenance work should be completed by trained maintenance personnel, please do not disassemble or repair without the help of personnel.
Control Parameters
| Control Parameters | Range | Stepping | |
| Transmitting Area | Transmitting Voltage | 60V,110V,150V,200V,250V,300V,350V,400V | Chose |
| Pulse Width | 1~40(one time is approximately 28ns) | One Time | |
| Repetition Rate(Internal Trigger) | 4Hz,8Hz,16Hz,20Hz,100Hz,500Hz,1kHz,2kHz | Chose | |
| Trigger Source | Internal Trigger,External Trigger | Chose | |
| Receiving Area | Single/Dual Crystal | Single Crystal(1T/1R),Dual Crystal(1T/2R) | Chose |
| Damping | 34Ω,50Ω,90Ω,510Ω | Chose | |
| Gain | 0~60dB | 1dB |
Technical Specifications
| Pulse Type | Negative Square Wave Pulse |
| Rise Time | Generally between 2.0-7.5ns, the damping will reach 20ns when it is 510Ω |
| Fall Time | Generally about 2.8ns |
| Pulse Width | One time pulse width is approximately 28ns |
| Band Width | 0.5-20MHz |
| Excitation Mode | Pulse-Echo(P-E),Penetration(T-T) |
| Repetition Frequency | Internal Trigger:4Hz-2kHz;External Trigger:0-20kHz |
| External Trigger | Rising Edge Trigger;Trigger Voltage:3.3V |
Host Specifications
| Outline Size | 18.4cm*12.6cm*5cm | Operating Temperature | 0-55℃ |
| Weight | 542g |
Standard Configuration
| Host Machine PR20 | 1 | Connecting Cable Q9 to Q9 | 2 |
| Communication USB | 1 | USB Type-C data Cable | 1 |
|
Control Software (Stored in USB Flash Drive) |
1 |



